This amazing new lamp can simply perform in ways that current lamps cannot. In order to truly maximize the potential of this lamp technology, you need to forget all of your current assumptions in regards to how UV curing works. This lamp technology defies accepted UV curing limitations. It is simply doing what it should not be allowed to do. It's curing faster. Its power consumption is minimal. The mechanism of cure is operating beyond current standards, due to the fact that this lamp is 100% efficient.
A need was identified to be able to accurately measure cure with UV LED's. The question was, “which wavelengths perform better?” We have defined performing better as curing better. So, we developed a procedure using the TFC-9000 to quantitatively evaluate the curing of polymers with UV LED's. This allows us to easily determine which LED wavelength we should use in designing an LED curing system for use with a specific polymer.
This recent test performed by the TFC-9000 clearly demonstrated the effects of curing a UV curable coating with different UV wavelengths. The same coating was cured with 3 unique UV LED lamps and the resultant curves were overlaid for evaluation. The TFC-9000’s measured results (in the graph above right) clearly show that while all 3 lamps cured the sample in approximately the same amount of time, the UV LED lamp at 415nm cured the coating significantly better than the other 2 UV LED wavelengths. The best curing LED wavelength is identified as the curve with the highest peak of heat. As well, we are also able to measure the time to peak (which is the cure rate). This allows us to determine the number of LED’s needed to achieve the desired speed for each customer’s specific process. In this test, to achieve the required cure rate for the specified application line speed, a linear array of 300 LED’s is needed.
UV curing without heat!
Heat sensitive substrates (films, foils, DVDs, CDs, etc.)
UV curing without radiometers!
Consistent lamp output for tens of thousands of hours!
UV curing without replacement lamps!
Keep your line running - no downtime!
• Instant on/off
• Emits no heat
• Tens of thousands of hours of lamp life
• Scalable from 1"-1000'--can be sized exactly to your specifications
• Non-hazardous lamp
• Powered by universal power wall adapter
• No shutters needed
• Able to cure heat sensitive substrates
• No costly replacement parts required - no downtime!
• Greatly expands market potential to include areas previously unavailable to UV technology
• No need for radiometers
Now Commercially Curing:
• Opaque Black Inks
• Wide Format Ink Jet
• Wire Marking Inks
• Flexo Inks
• Screen Inks
• Ink Jet
• Laminating Adhesive
• Silicone Release Lining
• 3-D Curing
• Narrow Web Flexo
• Wood Repair/Finishing
• Wire Marking/Tacking
• Medical Assembly
This product is no longer in stock